A) Device Restart - VOLTCRAFT BS-1000T Bedienungsanleitung

a) Endoscope Restart
Rear
If the BS-1000T does not react, you can reset the device.
Switch on the device with the on/off button (4).
Insert a thin object of about 3 cm of length (e.g. a ball point mine) into the reset opening at the back of
the device.
Touch it to the small reset button inside the opening.
The device switches off.
Proceed with care when resetting. The device can be damaged when pointy objects are
used.
All settings made before this are lost. The device restarts.
38
Reset