Automatic Power-Off; Recording Photos; Recording A Video - VOLTCRAFT BS-1000T Bedienungsanleitung

c) Automatic Power-Off
With the "Auto Off" Menu function, you can set the time after which the device automatically powers off if
no recording is running or a button is pressed.
1. Press the "OK" button once to call the menu.
2. Use the buttons
press "OK".
3. Use the buttons
matic power-off time. The endoscope will switch off when it was not used for the corresponding time.
4. Press "OK" to save the change and return to preview mode.
d) Recording Photos
To record an individual image, simply press the button
memory card must be inserted (chapter Inserting the SD Memory Card). Keep the connected camera as
calm as possible to receive a good recording.
Press the button
The recorded picture is stored in JPG format on the "DCIM" folder on the SD card, and the file names are
assigned serial numbers.
In narrow tubes, it may be of advantage to reduce lighting slightly to prevent reflections and
too bright images.
e) Recording a Video
To record videos, proceed as in still recording. For this, a matching SD memory card must be inserted
(chapter Inserting the SD Memory Card).
Press the button
The symbol for video recording appears on the monitor. The current recording duration is indicated on
the display.
Press the button
The recorded video is stored in ASF format on the "DCIM" folder on the SD card, and the file names are
assigned serial numbers.
/ to move the cursor upwards or downwards and then chose "Auto Off" and
/ to move the cursor upwards or downwards and to chose the desired auto-
to record a photo in video playback. (Chapter Playback of Photos/Videos)
in preview mode to start the recording.
again to terminate recording.
in preview mode. For this, a matching SD
33