Operation - Stahl 6009/5..-....- Serie Betriebsanleitung

Operation

EN
10 Operation
EN
EN
10.1 Operation
EN
10.1.1 Operating Modes
EN
Power supply operation
EN
Stand-by operation
EN
Continuous operation
EN
Normal lighting operation The lamps are operated by normal lighting.
EN
EN
Emergency light operation:
EN
In the event of a power failure, the light fitting switches to emergency light operation.
Emergency lamp
EN
• is marked with a green dot on the lamp holder.
EN
• is switched on regardless of the operation mode of the selected emergency
EN
light operating time.
EN
If the emergency lamp is defective, the light will be switched to the secondary lamp.
EN
Emergency light operation time
EN
EN
EN
EN
EN
EN
mit Brücke
with jumper
EN
Fernschalter
Remote switch
EN
Fernschalter
Remote switch
EN
Emergency light
operation time
1.5 hours
3.0 hours
Emergency light blocking
A remote switch for emergency light blocking can be connected to terminals
9 and 10 of the emergency light electronics.
22
Emergency Light Fitting for Fluorescent Lamps
Series 6009
The lamps are switched off regardless of normal lighting.
The lamps are switched on regardless of normal lighting.
LED green
LED grün
LED red
LED rot
ohne Brücke
1,5 h
3 h
without jumper
BAT-
BAT+
Jumper between terminals 11 and 12 of the emergency light
electronics
open
closed
14
13
12
11
10
9
8
226311 / 600960300010
2014-03-12·BA00·III·en·00