Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Technical data
EN
Technical Data
EN
Mounting / Installation
EN
Cable glands
EN
EN
EN
EN
EN
EN
EN
EN
EN
Connection
EN
EN
EN
EN
EN
EN
Through wiring
EN
EN
EN
EN
EN
EN
EN
Assembly
8
Emergency Light Fitting for Fluorescent Lamps
Series 6009
Standard luminaire
Plastic:
2 x M25 x 1.5 cable gland 8161 and
1 x M25 x 1.5 stopping plugs 8290 (enclosed)
Metal:
2 x metal plates M20 x 1.5 connected by means of PE for metal
cable entries
Attention: cable entries must be ordered separately
Special:
max. 4 bores for M20, M25, NPT ½''
max. 2 bores for NPT ¾''
Metal cable glands: M20 x 1.5, M25 x 1.5; earthing of the metal
Standard:
Spring clamp terminals
6-pole: L1, L2, L3, L', N, PE
Clamping range: 1 x 0.75 ... 4 mm
(2 free clamping units per pole available)
Special:
Terminal block with covering
6-pole: L1, L2, L3, L', N, PE
Clamping range: 2 x 1.5 ... 6 mm
2 x 1.5 ... 4 mm
Through wiring
Standard luminaire
Luminaires are equipped with internal through wiring.
Ingoing and outgoing leads can be connected on the
opposite sides.
Terminals: see Techn. data
Wiring cross-section: 2.5 mm
without
Optional
On the connection side, there are 2 bores M25 x 1.5 for
cable entries for ingoing and outgoing wiring of the
connection line (ingoing and outgoing leads on one side).
For outdoor mounting, a breather is recommended
Standard luminaire
Standard:
2 x M8 insert nuts in the enclosure
Special:
Mounting grooves in the enclosure for the use of fastening and
ceiling rails for variable luminaire mounting
(variable mounting distances for luminaires
17 W; 18 W: 320 ... 480 mm;
32 W; 36 W: 670 ... 930 mm)
cable entries by means of metal plates
2
(solid / finely stranded)
2
(solid);
2
(finely and extra finely stranded)
2
for max. 16 A
2014-03-12·BA00·III·en·00
226311 / 600960300010
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
