Commissioning - Stahl 6009/5..-....- Serie Betriebsanleitung

Luminaires with approved cable glands and stopping plugs; not supplied by
R. STAHL Schaltgeräte GmbH
Cable glands and stopping plugs which are not approved.
The explosion protection is impaired!
• Only use separately certified cable glands and stopping plugs.
Note!
• the required dust resistance!
• the required temperature resistance,
• the IP degree of protection according to the rating plate!
• the high degree of mechanical load!
• the operating instructions of the cable glands and stopping plugs!
• the range of the permissible cable diameter!
9

Commissioning

Check the device before commissioning!
Explosion protection is impaired!
• Observe the inspection requirements in the current national regulations
• Check the device for proper installation and function before
Before commissioning, ensure that
• the device has been installed according to regulations.
• the power supply voltage and the rated operational voltage are identical.
• the required cable diameter for cable glands has been used.
• the cable entries and stopping plugs have been securely tightened.
• the cables are correctly connected.
• the connection has been performed correctly.
• all screws and nuts are tightened according to regulations.
• the connection chamber is clean.
• the device is not damaged.
• no foreign bodies are inside the device.
• the device is sealed according to regulations.
• the battery is connected.
Condensation
due to specific environmental and operating conditions condensation cannot be avoided
completely.
• operate the luminaire continuously or periodically over extended periods of time!
• avoid thermal bridges!
226311 / 600960300010
2014-03-12·BA00·III·en·00
before commissioning in order to maintain the explosion protection.
commissioning.
WARNING
WARNING
NOTE
Emergency Light Fitting for Fluorescent Lamps
Series 6009
Commissioning
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
21