Stahl 6009/5..-....- Serie Betriebsanleitung Seite 39

Technical Data
Electrical data
Rated voltage
Rated insulation
voltage
Disconnection of
the light
Luminous characteristics
Lamps
Measures for light
guidance
Ambient conditions
Ambient temperature
Mechanical data
Degree of protection
Protection class
Material
Enclosure
Enclosure
Colour
Lamp cover
Gasket
Lamp locking
226311 / 600960300010
2014-03-12·BA00·III·en·00
Standard:
• 220 ... 240 V ± 10%, 50 / 60 Hz (Lamps acc. to IEC60081)
Optional:
• 110 ... 127 V ± 10%, 50 / 60 Hz (Lamps acc. to IEC60081)
• 120V ± 10%, 50 / 60 Hz (Lamps acc. to ANSI IEC C78.81)
320 V
When opening the light
Switch with safety lock; when opening the central lock, all poles of the voltage
supply to the ballast are disconnected; contacts of the switching element are
NC contacts, they can only switched on again when the lamp cover and the
central locking system are closed.
In case of a lamp fault, the electronic ballast disconnects the defective lamp
from the power supply.
2x 18 W; 2x 36 W (nach IEC60081)
2x 17 W; 2x 32 W (nach ANSI IEC C78.81)
Standard: wide beam, internal reflector of the light fittings is painted in white
colour.
Colour: signal white RAL 9003; lateral glare reduction in the luminaire trough.
- 30 ... + 50 °C
- 20 ... + 50 °C with Breathing Glands 8162
- 5 ... + 40 °C operationable
IP66 / IP67 (IP64 when using the breather 8162) IEC 60598
I (with internal PE connection)
Polyester resin, glass fibre-reinforced
colour grey, similar to RAL 7035
Polycarbonate
Silicone foam gasket in the lamp cover
Central locking which can be opened/closed using a socket key M8 / wrench
size 13, hinged lamp cover
Emergency Light Fitting for Fluorescent Lamps
Series 6009
Technical data
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
7