Usb Device Playback - JVC KD-DB52 Bedienungsanleitung

MP3/WMA/AAC playback
Symptom
Disc cannot be played back.
"READING" keeps flashing on the
display.
Tracks do not play back in the
order you have intended them to
play.
The elapsed playing time is not
correct.

USB device playback

Symptom
"READING" keeps flashing on the
display.
"NOT SUPPORT" appears on the
display and track skips.
Tracks/folders are not played back
in the order you have intended.
"CANNOT PLAY" flashes or "NO
0
USB" appears on the display.
The unit cannot detect the USB
0
device.
While playing a track, sound is
sometimes interrupted.
iPod/iPhone playback (KD-DB52 only)
Symptom
The iPod does not turn on or does
not work.
The sound is distorted.
Noise is generated.
Playback stops.
"CANNOT PLAY" flashes on the
display.
Record the tracks using a compliant application on the
0
appropriate discs. (A page 20)
Add appropriate file extensions to the file names.
0
A longer readout time is required. Do not use too many
hierarchical levels and folders.
The playback order is determined when the files are recorded.
This sometimes occurs during playback. This is caused by how
the tracks are recorded on the disc.
A longer readout time is required. Do not use too many
0
hierarchical levels and folders.
Turn off the power then on again.
0
Reattach the USB device again.
0
Check whether the track is a playable file format.
The playback order is determined by the file name. Folders with
names beginning with numbers are sorted in numerical order.
Folders with names not beginning with numbers are sorted
according to the file system of the USB device.
Check whether the connected USB device is compatible with
0
this unit.
Reattach the USB device again.
0
The tracks have not been properly copied into the USB device.
Copy tracks again into the USB device, and try again.
Check the connecting cable and its connection. If this does
0
not solve the problem, reset the iPod/iPhone.
Turn off the power and then turn it on again.
0
Detach the iPod/iPhone from this unit, turn off the iPod/
0
iPhone and then turn it on again.
Reset the iPod/iPhone using hardware reset and not the reset
0
function in the menu.
Charge the battery of the iPod/iPhone.
0
Check whether <IPOD SWITCH> setting is appropriate.
0
(A page 12)
Deactivate the equalizer either on this unit or the iPod/iPhone.
Turn off (uncheck) the "VoiceOver" feature of the iPod.
For details, visit <http://www.apple.com>.
The headphones are disconnected during playback.
Restart the playback operation. (A page 11)
Check whether the connected iPod/iPhone is compatible with
this unit. (A page 11)
Troubleshooting
Remedy/Cause
Remedy/Cause
Remedy/Cause
ENGLISH | 23