Using Bluetooth Devices; Using The Bluetooth Mobile Phone - JVC KD-DB52 Bedienungsanleitung

Using Bluetooth devices

Using Bluetooth devices
For Bluetooth operations, it is required to connect the Bluetooth adapter, KS-BTA100 (separately
purchased) to the auxiliary input jack (R-AUX/BT ADAPTER) on the rear of the unit. (A Installation/
Connection Manual)
KS-BTA100 is not available in some countries. Please contact your dealer where you purchased this
0
unit.
For details, refer also to the instructions supplied with the Bluetooth adapter and the Bluetooth
0
device.
Operations may be different depending on the connected device.
0
Preparation
Register (pair) a Bluetooth device with KS-BTA100.
1
Refer to the instructions manual supplied with KS-BTA100.
0
Change the <SRC SELECT> settings of this unit.
2
(Hold)

Using the Bluetooth mobile phone

KS-BTA100
Microphone
About microphone volume:
When you turn off the power of the unit, the volume level changes to Normal.
0
Using the Bluetooth audio device
B "BT AUDIO"
(CD receiver)
KS-BTA100
16 | ENGLISH
B<SRC SELECT>
B<R-AUX>
B<BT ADAPTER>
Adjusting the microphone volume
Volume level: High/ Normal (initial)/ Low
(Low)
(High)
0
When a call comes in...
0
Making a call to the last connected number from
(Press)
your phone.
0
While talking...
0
0
Voice dialing is available only when the
connected mobile phone has the voice
(Hold)
recognition system.
Starts/pauses playback.
0
0
0
Receiving a call
Making a call
Switching between hands-free and phone
Ends/rejects call
Voice dialing
If playback does not start, operate the
Bluetooth audio player to start playback.
Selects track. (Press)
Fast-forwards or reverses the track. (Hold)