User; Savings - clage Home Server Gebrauchs- Und Montageanleitung

Home Server with Control-App "Smart Control"
Use
statistical data cannot be restored.
Devices: This configuration menu provides access to all connected devices. Tapping the device
name will take you to the settings of the selected device. For details see chapter "Initial opera-
tion".
Software Info: In this menu you will find information about the software version of the app,
the imprint and the expert mode.
• Expert mode: Activation gives access to advanced controls of the registered devices,
e.g. port adjustment and load shedding (if applicable to the selected device).
Load Shedding: If further three-phase devices are connected, a load shedding relay designed
for electronic instantaneous water heaters (CLAGE no. 82250) can be connected to phase con-
ductor L2. This relay ensures the operation of the water heater by switching off other consum-
ers until the end of heating operation.
Tap on or to set a value of 0, 1 or 2.
Operating mode 1 must be selected first, thus to
check the correct operation of the load shedding
relay at low device output (35 degree celsius set-
point and low water flow rate). Mode 2 must be
selected if the load shedding relay flickers.
Note: The load shedding configuration should only be carried out by a specialist trades-
man.

4.4.4 User

Up to eight users can enter their names and select their own profile image. This appears
together with the first ten letters of the name on the main screen.
In the main screen, every user can set up and save his own desired temperatures for the differ-
ent applications.
By tapping on the symbol

4.4.5 Savings

Here, you can determine the parameters for the costs in the consumption statistics. You can
select a currency symbol under "Settings".
Electricity Price (€/kWh): Indicate the electricity price from your own electricity company.
Water Price (€/m³): Indicate the water price from your own water company.
ECO Settings: The Eco mode can be enabled or disabled. If it is enabled, the outlet tempera-
tures are limited to an energy-efficient value.
you can delete a user profile.
44 / 52
Value Description
Operation without load shedding
0
relay, factory setting
Operation with normal
1
load shedding relay
Operation with sensitive
2
load shedding relay