clage Home Server Gebrauchs- Und Montageanleitung Seite 45

Use
Temperature setting
The desired temperature can be selected by tapping on
dragging along the coloured scale ring for a quick selection within a range of 20 to 60 °C.
Tapping or once changes the temperature by 1 °C, in the comfort range between 35 and
43 °C even by just 0.5 °C. If the temperature is set below 20 °C, the symbol
temperature display and the device switches off the heating function.
Applications
Preset applications can be selected here. Simply tap on the desired symbol. The temperatures set
at the factory ( handwash = 35 °C,
can be changed for each application via the temperature setting. If you touch the temperature
value in the temperature display for 3 seconds, it is saved for the selected application. The
temperature display flashes once for confirmation. Application temperatures saved in the user
profile can be called up at any time by tapping on the corresponding symbol.
Status display
Display area for functions which require confirmation from the user or which are of great signifi-
cance.
Eco active: The outlet temperature for all applications and the water flow are limited to
an energy-efficient value. If the temperature is set higher via the temperature setting,
the symbol start to flash. The temperature will be reset to the Eco value and the symbol
stops flashing, three minutes after the drawing.
Maintenance: Tap the symbol to open a status message with additional information.
Maximum temperature reached: The temperature cannot be increased any further since
the set temperature limit has been reached. The temperature limit can be changed in
the main menu under "Settings".
Device list
The instantaneous water heaters accessible via the app can be selected
here. Only active instantaneous water heaters are displayed.
Drawing mode
If heated water is drawn from a tap, the main screen changes to drawing
mode and, depending on the set outlet temperature, changes the back-
ground colour from blue for low tempera tures to red for high temperatures.
In this mode the scale ring displays the actual power consumption
(from 0 to 100 %) of the selected device.
and
shower = 38 °C, bath = 42 °C,
41 / 52
for the fine setting or by
appears in the
hot water = 48 °C)
CLAGE