Main Menu; Settings - clage Home Server Gebrauchs- Und Montageanleitung

Home Server with Control-App "Smart Control"
Use

4.4.2 Main menu

All function menus and saved values of the device can be selected here.
Automatic
Statistics

Settings

Automatic (only at devices including Servotronic®)
Duration: Tap on or to set the desired time and then tap on "START" to
activate Automatic mode. The view changes to the main screen where the
set time is displayed directly below the temperature display.
Tap on the time starts the function and the time starts to count down as sec-
onds. Tap on the time again to pause and restart the function at any time.
When the time has elapsed, "00:00" flashes briefly and a message appears.
Statistics
The data on consumption and use can be seen optionally for one device
or added for all devices on the "Statistics" screen. For the correct display
of costs, the current prices for electricity and water must be entered in the
"Savings" menu item in the main menu.
Notes:
The data of consumption and use are not suitable for billing purposes.
After power failure, the system time on the Home Server must be syn-
chronised either with a tablet / smartphone or a timer server on the
internet. Any tapping before the synchronisation of the system time will be misdated.
The data of consumption and use of the previous 15 minutes may be lost after each
power failure at the Home Server.
User
Savings
Info
42 / 52