Electronic Adjustment; Use Of Dishwasher Salt - AEG F75500VI Benutzerinformation

10

Use of dishwasher salt

19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.

Electronic adjustment

1. Activate the appliance. Make sure that the appliance is in setting mode.
2. Press and hold function buttons (B) and (C) at the same time until the indicators of
function buttons (A), (B) and (C) flash.
3. Release function buttons (B) and (C).
4. Press function button (A),
• The indicators of function buttons (B) and (C) go off.
• The indicator of function button (A) continues to flash.
• The acoustic signals sound.
• The display shows the setting of the water softener (example:
acoustic signals = level 5).
5. Press function button (A) again and again to change the setting.
6. Deactivate the appliance to confirm.
USE OF DISHWASHER SALT
How to fill the salt container:
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of wa-
ter (only for the first time you fill with
salt).
3. Fill the salt container with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from the
salt container when you fill it with salt.
Water hardness
33 - 39
26 - 32
19 - 25
7 - 18
< 7
Water hardness adjustment
3.3 - 3.9
2.6 - 3.2
1.9 - 2.5
0.7 - 1.8
< 0.7
5
4
3
1)
2
2)
1
and you hear five