Removing And Cleaning The Spray Arms - AEG F75500VI Benutzerinformation

Removing and cleaning the fine filter (2)
1. Hold the fine filter by the handle and turn
it counterclockwise.
2. Clean the fine filter fully with a brush un-
der running water.
3. Put the fine filter in position.
4. To lock the fine filter, hold the handle and
turn it clockwise. Make sure that the signs
on the filter agree with each other.

Removing and cleaning the spray arms

At regular intervals make sure that the nozzles in the spray arms are not blocked.
Use a thin pointed object to clean the nozzles.
Carefully clean the nozzles to prevent damage.
Removing and cleaning the top spray arm
1. Turn the fixing screw (A) counterclockwise.
2. Pull the top spray arm off the shaft.
3. Clean the top spray arm and the fixing
screw under running water.
4. Put the top spray arm in position and turn
the fixing screw clockwise.
Care and cleaning
21