AEG F75500VI Benutzerinformation Seite 29

8. Using the template, mark out and drill 8
holes (b) for the two guides (ø2 mm, 12
mm deep) at the top of the hinged door.
To do this, align the drilling template
with the top edge of the hinged door.
9. Screw the hinges using 4 countersunk
head-wood screws and the guides using
8 Spax screws (4.0 x 20, pozidrive) to the
hinged door.
10. Snap the hinges on the hinged door into
the bottom units of the hinges. Hold the
hinged door carefully, so that the hinges
are not bent.
11. Adjust the hinges using the screws (A),
(B) and (C) to match the kitchen unit
(width of gap, etc.)
29
Installation