Technical Information; Technical Data; Installation - Küppersbusch IKE2380-1 Benutzerinformation

Replacing the lamp
The appliance is equipped with a longlife
LED interior light.

TECHNICAL INFORMATION

Technical data

Dimensions of the recess
Height
Width
Depth
Rising time
Voltage
Frequency
The technical information are situated in the
rating plate, on the external or internal side
of the appliance and in the energy label.

INSTALLATION

WARNING! Refer to Safety
chapters.
Positioning
This appliance can be installed in a dry, well
ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Cli- Ambient temperature
mate
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Only service is allowed to replace the
lighting device. Contact your After Sales
Service.
mm
mm
mm
Hours
Volts
Hz
Some functional problems might
occur for some types of models
when operating outside of that
range. The correct operation
can only be guaranteed within
the specified temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer service
or to the nearest Service Centre
Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your domestic
power supply.
• The appliance must be earthed. The
power supply cable plug is provided with
a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
1225
560
550
12
230 - 240
50
29