Ventilation Requirements; Technical Information; Technical Data - Küppersbusch IKEF2680-0 Benutzerinformation

Some functional problems might
occur for some types of models
when operating outside of that
range. The correct operation
can only be guaranteed within
the specified temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer service
or to the nearest Authorised
Service Centre.
Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your domestic
power supply.
• The appliance must be earthed. The
power supply cable plug is provided with
a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a qualified
electrician.

TECHNICAL INFORMATION

Technical data

Dimensions of the recess
Height
Width
Depth
Voltage
Frequency
The technical information is situated in the
rating plate, on the external or internal side
of the appliance and in the energy label.
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the E.E.C.
Directives.

Ventilation requirements

The airflow behind the appliance must be
sufficient.
min.
5 cm
200 cm
CAUTION! Refer to the
assembly instructions for the
installation.
mm
mm
mm
Volts
Hz
2
min.
200 cm 2
1400
560
550
230 - 240
50
15