Manual Adjustment; Electronic Adjustment - Electrolux ESL 6601RA Benutzerinformation

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance.
2. Make sure that the display shows the
programme P1. If the display shows a
different programme, press and hold
touchpads (4) and (5) until P1 shows
in the display.
3. Press and hold touchpads (4) and (5)
at the same time until the indicators of
touchpads (3), (4), (5) and (6) start to
flash.
4. Press touchpad (3).
6.2 Filling the salt container
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicators of touchpads (4), (5)
and (6) go off.
• The indicator of touchpad (3) contin-
ues to flash.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the setting of the
water softener, e.g.
5. Press touchpad (3) again and again to
change the setting.
6. Deactivate the appliance to confirm
the setting.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt contain-
er (only for the first time).
3.
Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
ENGLISH 29
= level 5.