Manual Adjustment; Electronic Adjustment - Electrolux ESF 6610ROW Benutzerinformation

Downloaded from www.Manualslib.com
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soften-
er manually and electronically.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate the
appliance.
2. Press and hold, at the same time,
Program and TimeSaver for a few
seconds.
3. Press and hold, at the same time, De-
lay and Option until the indicators
, and start to flash.
4. Press Program,
6.2 Filling the salt container
manuals search engine
Turn the water hardness dial to the posi-
tion 1 or 2.
• The indicators
• The indicator
• The display shows the current set-
ting of the water softener. E.g.
= level 5.
5. Press Program again and again to
change the setting.
6. Press the on/off button to deactivate
the appliance and to confirm the set-
ting.
1. Turn the cap counterclockwise and
open the salt container.
2. Put 1 litre of water in the salt contain-
er (only for the first time).
3. Fill the salt container with dishwasher
salt.
4. Remove the salt around the opening
of the salt container.
5. Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
ENGLISH 29
and go off.
continues to flash.