F) Activating Outdoor Unit From Indoor Unit - Renkforce 1373174 Bedienungsanleitung

• If you briefly push the "
and you can speak to the visitor.
To deactivate the microphone (and also to activate it again), briefly push the "
button (8).
If the microphone is activated, the upper blue LED (9) will be lit.
• You can change the following settings with the blue LED (9) kit:
- " " (3) or " " (6) buttons: Changing the playback volume
- " " (4) or " " (7) buttons: Changing the display brightness
• A photograph has been saved here automatically when the visitor pushed the doorbell
button at the outdoor unit. If you want to save another photograph manually, briefly
push the " " button (5).
• To activate the door opener, briefly push the "
nected to the potential-free switching contact of the outdoor unit is activated for
approx. one second (cannot be changed).
• To terminate the talk, briefly push the "
unit is now back in standby mode.
If the microphone is still active, it is activated when the "
the first time. Push the "
unit to switch to standby mode.

f) Activating Outdoor Unit from Indoor Unit

Observe:
If the outdoor unit is not supplied with voltage/power via the mains adapter,
but via the rechargeable battery, this function is not available.
• If you briefly push the "
the lower LED (11) lights up yellow.
• If you briefly push the "
and you can speak to the visitor.
To deactivate the microphone (and also to activate it again), briefly push the "
button (8).
If the microphone is activated, the upper blue LED (9) will be lit.
" button (8), the microphone of the indoor unit is activated
" button (12). The display goes out; the indoor
" button again for the display to go out and the indoor
" button (12) at the indoor unit, the camera image appears;
" button (8), the microphone of the indoor unit is activated
" button (10). The door opener con-
" button is pushed
"
"
53