Introduction; Device Description (Fig. 1 - 45); Scope Of Delivery; Proper Use - Scheppach Mfh440-Li20Pros Original Bedienungsanleitung

1. Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability
laws, the manufacturer of this device assumes no
liability for damage to the device or caused by the
device arising from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised
specialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100,
DIN 57113 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating man-
ual before installing and commissioning the device.
This operating manual should help you to familiarise
yourself with your tool and to use it for its intended
purpose.
The operating instructions include important instruc-
tions for the safe, proper and economic operation of
the machine, for avoiding danger, for minimising re-
pair costs and downtimes and for increasing the reli-
ability and extending the service life of the machine.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the machine in your country.
Keep the operating manual package with the ma-
chine at all times and store it in a plastic cover to pro-
tect it from dirt and moisture. They must be read and
carefully observed by all operating personnel before
starting the work. The machine may only be used by
personnel who have been trained to use it and who
have been instructed with respect to the associated
hazards. The required minimum age must be ob-
served.
In addition to the safety instructions in this operating
manual and the separate regulations of your coun-
try, the generally recognised technical rules relating
to the operation of such machines must also be ob-
served.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.

2. Device description (Fig. 1 - 45)

1. Motor drive unit
1a. Rechargeable battery indicator
2. Control handle
3. Safety switch
4. Throttle
5. On/off switch
6. Pole-mounted pruner
7. Brushcutter / grass trimmer
8. Hedge trimmer
8a. Connecting rod
9. Cutting blade
10. Cutting knife guard
11. Cutting unit protection
12. Carrying strap
13. Chainsaw protection
14. Adjustment lever
14a. Unlocking lever
15. Cutting unit
16. Protective cover (trimmer + grass trimmer)
16a. Blade
17. Thread coil
17a. Trigger
18. Protective cover (top)
19. Saw chain
20. Chainsaw blade
21. Chainsaw oil tank
22. Handle
23. Allen key size 4
24. Allen key size 5
25. Open-ended spanner size 8/10
26. Assembly tool
27. 2x rechargeable batteries 20V, 4.0Ah
28. 20V charging unit

3. Scope of delivery

• 1x assembly tool
• 1x Allen key size 4
• 1x Allen key size 5
• 1x carrying strap
• 1x thread coil 2.0x4m
• 1x cutting blade
• 1x manual
• 1x chainsaw protection
• 1x Kangxin chain blade 10"
• 1x Kangxin chain 10"
• 1x cutting unit protection
• 2x rechargeable batteries 20V, 4.0Ah
• 20V charging unit

4. Proper use

The strimmer (using the cutting knife) is suitable for
cutting shrubs, strong weed and undergrowth. The
grass trimmer (using thread coil with trimming line) is
suitable for cutting lawns, grass areas and light weed.
www.scheppach.com
GB | 33