Cleaning; Storage - Scheppach Cmt-12V Originalbetriebsanleitung

Selecting a suitable tool attachment
Function Accessories
Drilling HSS drill
Cutting Milling cutter bits
Engraving Engraving bits
Rust
Wire brush
removal
Polishing Polishing wheels
Clean Plastic brushes
Grinding disc
Sanding
Grinding bits
Cutting off Cutting wheel

12. Cleaning

m Warning!
Switch off the product and allow the product to cool
down before carrying out inspection, maintenance or
cleaning work!
Have the product repaired by the service centre or a
qualified electrician and only with original spare parts.
This ensures that safety of the product is maintained.
Make sure that no liquids can penetrate the interior of
the product.
Always keep the product clean, dry and free from oil or
grease. Remove dust after each use and before storage.
Regular proper cleaning helps to ensure safe use and
prolongs the service life of the product.
Clean the product with a dry cloth. Use a soft turnout
brush for hard-to-reach areas.
In particular, remove dirt and dust from the vents with a
cloth and a soft brush.
Ventilation openings must always be free.
Perform a complete recharge of the rechargeable bat-
tery at the beginning and at the end of a longer period
of non-use.
use
Machining wood
A variety of tasks, e.g.: Creating
protrusions, hollows, shapes, grooves
or slots
Making markings Handicrafts
Rust removal
Machining various metals, especially
precious metals such as gold or silver
Example:
Cleaning plastic housings that are
difficult to access
Grinding work on stone or wood
Fine work on hard materials, such as
ceramics or alloy steel
Machining metal, plastics and wood
www.scheppach.com
Use of the smallest drill bit: 10 mm
If a lithium-ion battery is to be stored for a longer peri-
od of time, the charge level must be checked regularly.
The optimal state of charge is between 50 and 80 %.
The optimal storage climate is cool and dry.
m NOTE!
Do not use chemical, alkaline, abrasive or other ag-
gressive cleaning agents or disinfectants to clean the
product, as these may damage the surfaces.
Spare parts not listed (such as the battery charger) can
be ordered via our call centres.

13. Storage

Store the product and its accessories in a dark, dry and
frost-free place that is inaccessible to children.
The optimum storage temperature lies between 5 and
30 ˚C.
Store the product in its carry case. Store the operating
manual with the product.
Protrusion
(min-max)
18-25 mm
protrusion
18-25 mm
18-25 mm
9-15 mm
12-18 mm
9-15 mm
12-18 mm
10 mm
12-18 mm
GB | 35