Herunterladen Inhalt Inhalt Diese Seite drucken

Recording From The Radio; Dubbing From Tape To Tape; Erasing Recorded Tapes - Sharp CD-XP300H Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

„ Recording from the radio

1
Tune in to the desired station. (See page 14.)
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE (TAPE-2
button.
Recording will be paused.
4
Press the
/
(
) button to start re-
cording.
To interrupt recording:
Press the REC PAUSE (TAPE-2
) button.
To resume recording, press the
/
(
) button.
To stop recording:
Press the
button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Erase-prevention tab of cassette tapes:
z When recording on a cassette tape, make
sure that the erase-prevention tabs are not re-
moved. Cassettes have removable tabs that
prevent accidental recording or erasing.
z To protect the recorded sound, remove the tab
after recording. Cover the tab hole with adhe-
sive tape to record on the tape without the tab.

„ Dubbing from tape to tape

You can record from TAPE 1 to TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into the
TAPE 1 cassette compartment. Insert
a blank tape into the TAPE 2 cassette
)
compartment.
It is recommended that the recording tape is
the same length as the master tape.
3
Press the TAPE (1
"TAPE 1" appears on the display.
4
Press the REC PAUSE (TAPE-2
button.
Recording will be paused.
5
Press the
dubbing.
To stop dubbing:
Press the
Side A
TAPE 1 and TAPE 2 will simultaneously stop.

„ Erasing recorded tapes

Tab for side B
Tab for side A
1
Load the tape to be erased into the TAPE 2 cassette compartment with the side to
be erased facing toward you.
2
Press the TAPE (1
3 Press the REC PAUSE (TAPE-2
4 Press the
Note:
Make sure that the TAPE 1 is not in use.
2) button until
)
/
(
) button to start
button.
2) button until "TAPE 2" appears on the display.
) button.
/
(
) button to start erasing.
01/12/11
CD-XP300H(H)E2.fm
CD-XP300H
ENGLISH
E-18
Tuning (See page 14.)

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis