Sound Control - Sharp CD-XP300H Bedienungsanleitung

Sound control

CD-XP300H
ENGLISH
„ Volume control
Press the VOLUME ( or ) button to increase or decrease the volume.
0 1 2
E-9
.....
29 30 MAXIMUM
„ Extra bass (X-BASS)/Pre-programmed
equaliser
(Main unit operation)
You can select the extra bass and pre-programmed equaliser modes with the same
button on the main unit.
Changing the mode:
When the EQUALIZER/X-BASS/DEMO button is pressed, the current mode setting
will be displayed. To change to a different mode, press the EQUALIZER/X-BASS/
DEMO button repeatedly until the desired sound mode appears.
X-BASS (X-BASS on) Bass frequencies are emphasised.
FLAT (X-BASS off) The sound is not modified.
POPS (X-BASS off) Bass and treble are slightly emphasised.
ROCK (X-BASS off) Bass and treble are emphasised.
CLASSIC (X-BASS off) Treble is reduced a lot.
VOCAL (X-BASS off) Vocals (midrange tones) are emphasised.
Treble is cut a little.
JAZZ (X-BASS off)
(Remote control operation)
To enter or cancel the extra bass mode:
When the power is first turned on, the unit will enter the extra bass mode which
emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra
bass mode, press the X-BASS button.
Selecting a pre-programmed equaliser mode:
When the EQ-MODE button is pressed, the current mode setting will be displayed. To
change to a different mode, press the EQ-MODE button repeatedly until the desired
sound mode appears.
POPS
FLAT ROCK
JAZZ VOCAL
Note:
If the EQ-MODE button on the remote control is pressed in the extra bass mode, it
will be cancelled automatically.
01/12/11 CD-XP300H(H)E1.fm
CLASSIC