Scheppach GS1500 ATG Originalbetriebsanleitung Seite 57

The oil level in the engine (4) is too low.
The engine
(4) is over- The air filter (58) is dirty.
heating.
The carburettor is not adjusted correctly.
Power The blade (46) is blunt or used up.
decreases,
poor cutting
perfor-
mance.
The blade screws/counter-blade screws
(44/48) are loose.
Heavy
vibrations /
Blades/counter-blades (46/47) damaged.
loud noises.
The device is damaged inside.
Add the correct oil to the engine (4).
Clean or replace the air filter (58).
See the engine manual.
Sharpening the blade (46) or replace it com-
pletely.
Tighten the blade screws/counter-blade screws
(44/48).
Replace the blades/counter-blades (46/47).
Contact customer service.
www.scheppach.com GB | 57