SCHUBERTH C3 LIMITED Bedienungsanleitung Seite 32

C. THE HELMET
VENTILATION 3 – CHIN VENTILATION INLET
(Visor ventilation)
The C3 is provided with an air vent in the chin area
for ventilation of the visor. Irrespective of the rider
position, a diverting mechanism ensures that the
airstream ventilates the visor panel effectively even
at low speeds. Pressing on the bottom or top part
of the ventilation element opens or closes the vent
respectively.
VENTILATION 4 – HEAD VENTILATION
The C3 is fitted with a constant air extraction system.
The air inside the helmet is guided through air
channels in the inner shell to the rear of the helmet.
The vacuum pressure in the neck area ensures
continuous escaping of the air in the helmet and thus
provides comfortable conditions for the wearer.
60
VENTILATION 5 – HEAD VENTILATION
The top of the shell features an air inlet hood with
3 adjustable settings to ventilate the top of the head.
Air entering here is drawn via channels to the top of
the head and thus effectively draws away heat from
the interior. An innovative rain deflector system keeps
the penetration of water into the helmet during heavy
rain to a minimum. A slider is provided on the air inlet
hood for regulating the ventilation; this is also easy
to adjust while wearing gloves. Push the slider back
to the first latch position for partial ventilation.
To open the inlet fully, push the slider further back.
Adapting Ventilation for Summer
and Winter
You can match the ventilation of the C3 to weather
conditions and to your personal preferences. While it is
desirable in summer for air entering the helmet to cool
the top of your head as directly as possible, the colder
air of the fall or winter can be reduced or directed
away. To do this, lift the central bridge of the head
padding slightly and unfurl the plastic straps situated
behind it in the forehead area to cover the ventilation
channels.
EN
61