VEVOR TDS-75CV Originalanleitung Seite 7

3. Improper connection of the equipment-grounding conductor can result
in a risk of electric shock. The conductor with insulation having an outer
surface that is green with or without yellow stripes is the
equipment-grounding conductor. If repair or replacement of the electric
cord or plug is necessary, do not connect the equipmentgrounding
conductor to a live terminal.
4. Check with a qualified electrician or service personnel if the grounding
instructions are not completely understood, or if in doubt as to whether the
tool is properly grounded.
5. Use only 3-wire extension cords that have 3-prong grounding plugs and
3-pole receptacles that accept the tool's plug.
6. Repair or replace damaged or worn cord immediately.
Grounding Pin
Grounding Pin
US EUR AUS
The outlet must be properly installed and grounded in accordance with all codes
and ordinances.
7. Do not use an adapter to connect this tool to a different outlet.
Grinder Tool Safety Warnings
For Your Own Safety Read Instruction Manual Before Operating Tool
Grinder
1. Wear eye protection.
2. Use grinding wheel suitable for speed of grinder.
3. Replace cracked wheel immediately.
4. Always use guards and eye shields.
5. Do not overtighten wheel nut.
6. Use only flanges furnished with the grinder.
- 6 -