Unpacking; Technical Data - Scheppach 5903802901 Originalbetriebsanleitung

10 1x Suction hose
11 1x Dust bag
12 1x Carrying strap
13 2x Replacement carbon brushes
14 1x Screwdriver
15 1x Allen key
1x Operating manual

5. Unpacking

• Open the packaging and carefully remove the product.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the product and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
m WARNING!
The product and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!

6. Technical data

Rated voltage
Nominal frequency
Power consumption
Grinding disc nominal speed
at no load
Sanding disc diameter
Grinding wheel diameter
Dimensions LxWxH
Suction hose length
24 | GB
230 V~
50 Hz
1200 W
1500 − 3200 min
-1
210 mm
215 mm
380x260x260 mm
1500 mm
www.scheppach.com
Spindle size
Protection class
Weight
Noise and vibration characteristics
Sound pressure level L
PA
Sound power level L
WA
Uncertainty K
Vibration parameters
Main handle vibration a
h
Additional handle vibration a
Uncertainty K
Subject to technical changes!
Wear hearing protection!
Exposure to noise can cause hearing loss.
Note:
• The noise and vibration values have been deter-
mined in accordance with EN 62841-1.
Note: The total vibration emission values specified
and the device emissions values specified have been
measured in accordance with a standardised test pro-
cedure and can be used for comparison of one electric
tool with another.
Note: The total vibration emission values specified and
the device emissions values specified can also be used
for an initial estimation of the load.
Warning: The vibration values and noise emission
values can vary from the specified values during the
actual use of the power tool, depending on the type and
the manner in which the power tool is used, and in par-
ticular the type of workpiece being processed.
Warning: It is necessary to determine the safety
measures for the protection of the operator based on
an assessment of the vibration load during the actual
conditions of use (In doing so, all parts of the operat-
ing cycle must be taken into account such as times in
which the power tool is switched off or times in which it
is switched on, but is not running under a load).
M14
II
3.4 kg
94.2 dB
102.2 dB
3 dB
2.409 m/s
2
4.303 m/s
2
h
1.5 m/s
2