Herunterladen Inhalt Inhalt Diese Seite drucken

Unpacking; Disposal And Recycling; Maintenance, Cleaning And Storage - Scheppach 7906106702 Original Bedienungsanleitung

Druckluft-schlauchtrommel
Inhaltsverzeichnis
Verfügbare Sprachen

Verfügbare Sprachen

7. Unpacking

• Open the packaging and carefully remove the device.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the device by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Spare parts
can be obtained from your specialist dealer.
• When ordering please provide our article number as
well as type and year of manufacture for your device.
m Attention!
The device and the packaging material are not
children's toys! Do not let children play with plas-
tic bags, films or small parts! There is a danger of
choking or suffocating!
8. Operation
• Hold the hose (4) firmly when rolling it up and down
so that the swinging hose (4) cannot injure anyone!
• Observe the maximum working pressure of the hose
(4). Only operate the hose (4) within the specified
parameters (see technical data).
1
Connect the hose (4) to the compressor.
2
Connect the compressed air tool via the quick-re-
lease coupling (3).
3
After work, remove the tool from the hose (4) by
pulling the quick coupling (3) firmly backwards.
Roll up the hose (4) again after work.

9. Maintenance, cleaning and storage

Disconnect the hose reel from the compressed air
source before starting maintenance.
• If the hose (4) is dirty, clean it before rolling it up.
Never use aggressive cleaning agents for this!
• Regularly check the leak-tightness of the hose (4).
• Lubricate the moving parts of the hose reel regularly.
• Replace defective and damaged parts immediately.
16 | GB
• When not in use, roll up the hose (4) completely and
store it in a dry, clean and frost-proof place.
Service information
With this product, it is necessary to note that the follow-
ing parts are subject to natural or usage-related wear,
or that the following parts are required as consuma-
bles.
Wearing parts*: Hose
* may not be included in the scope of delivery!
Please provide the following information in the event
of any queries:
• Machine data - type plate
Spare parts and accessories can be obtained from our
Service Centre. To do this, scan the QR code on the
front page.

10. Disposal and recycling

Notes for packaging
www.scheppach.com
The packaging materials are recy-
clable. Please dispose of packag-
ing in an environmentally friendly
manner.
Inhaltsverzeichnis
loading

Diese Anleitung auch für:

790610770279061067057906106709

Inhaltsverzeichnis