Operating And Functional Elements; Before Startup - Kärcher KM 70/30 C Bp Originalbetriebsanleitung

teries and avoid contact with impurities
such as metal dust.
Do not place tools or similar items on
–
the battery. Risk of short-circuit and ex-
plosion.
Do not work with open flames, generate
–
sparks or smoke in the vicinity of a bat-
tery or a battery charging room. Danger
of explosion.
Used batteries are to be disposed ac-
–
cording to the EC guideline 91/ 157
EWG in an environment-friendly man-
ner.
Operating and Functional
Elements
Figure 1, see cover page
1 Roller brush
2 Foam filter
3 Flat fold filter **
4 Blower dust suction **
5 Washer dust suction **
6 Carrying handle
7 Waste container
8 Handle filter shake-off **
9 Pressing handle for contact pressure to
the side brushes
10 Dust suction **
11 Programme switch
12 Push handle
13 Mains cable with plug *
14 Charging box ***
15 Battery cover
16 Reserve fuse
17 Fuse
18 Fault display: Battery
19 Battery display
20 Lever for contact pressure to sweeping
roller
21 Mains cable storage/ battery compart-
ment
22 Star grip pushing handle fastening
* only in the Bp Pack model
** only in the Adv. model
*** not in the Bp Pack model

Before Startup

Unpacking
 Open the carton on the side and take
out the appliance.
Your sales outlet should be informed
about any transit damage noted when
unpacking the product.
Assembly
Figure 2, see cover page
 Fasten the side brushes with the 3
screws enclosed in the packet.
Batteries
Safety notes regarding the batteries
Please observe the following warning notes
when handling batteries:
Observe the directions on the bat-
tery, in the instructions for use and
in the vehicle operating instruc-
tions
Wear eye protection
Keep children away from acid and
batteries
Danger of explosion
Fire, sparks, naked flames and
smoking must be strictly avoided
Danger of chemical burns
First aid
Warning note
Disposal
Do not throw the battery into the
regular waste
Please observe the following warning notes
when handling batteries:
Danger
Risk of explosion! Do not put tools or similar
on the battery, i.e. on the terminal poles
and cell connectors.
Risk of injury! Ensure that wounds never
come into contact with lead. Always clean
your hands after having worked with batter-
ies.
Installing and connecting the battery
 Remove the lid of the battery compart-
ment.
 Turn out the screw and remove the bat-
tery cover.
 Insert battery in battery mount.
Warning
Pay attention to correct poles.
Attach the connection cable provided with
the pack.
 Connect pole terminal (red cable) to
positive pole (+).
 Connect pole terminal to negative pole
(-).
 Replace the battery cover and fasten
using screw.
 Replace the lid of the battery compart-
ment and lock it.
Note
Before removing the battery, make sure
that the negative pole lead is disconnected.
2
-
EN
Check that the battery pole and pole termi-
nals are adequately protected with pole
grease.
Warning
Charge the battery before commissioning
the machine.
Charging battery
Danger
Risk of electric shock. Observe supply net-
work and fuse protection - see "Charger".
Only use the charger in dry rooms with suf-
ficient ventilation!
Note
The charging time for an empty battery is
approx. 12 hours.
Danger
Risk of injury! Comply with safety regula-
tions on the handling of batteries. Observe
the directions provided by the manufacturer
of the charger.
(1) Charging process for Bp Pack model
Danger
Risk of injury! The charger should be used
only if the mains cable is in an undamaged
state. Get the manufacturer, the customer
service agent or a qualified person to im-
mediately replace a damaged mains cable.
Note
Normally, the machine is equipped with a
maintenance-free battery.
 Insert the plug of the charger into the
socket.
Note
The charger has electronic controls and au-
tomatically switches off the charging pro-
cess. All functions of the machine are
automatically interrupted during the charg-
ing process.
The battery display shows the progress of
the charging process when the plug is in-
serted:
Battery is being
charged
Battery is charged glows green
Charger is defec-
tive
Battery poled or is
not connected
Battery defective
(2) Charging process for Bp model
 Insert the charging cable of the charger
in the charger box of the sweeper
 Plug in mains connector and switch on
charger.
After charging
Bp Pack model:
 Remove the mains cable and put it
away:
Insert the mains plug in the appliance
–
hood.
or
glows yellow
glows red
slowly blinks
red
blinks red
fast
9