8.8 Parts counting
For instance, 10 identical pieces are weighed; from this follows 10 as a reference
number of items. Then the average weight is given automatically by the balance. As
of now the pieces to be counted will be shown as items. As a rule:
The higher the reference quantity the higher the counting exactness.
Explanations for the balance adjustment:
The reference formation needs an exact determination of the weight value.
In order to use counting function PcS must be enabled in menu P4.
Operation:
Selection of menu item P4 Func
TARE
Press
TARE
Press
anew until PcS appears flashing
TARE
Press
F
Press
repeatedly until "SAVE?" appears.
Confirm by pressing
F
Press
, „FREE"or „10" or „20" or „50" appears
Select the required reference quantity by pressing
Confirm by pressing
Place the indicated quantity of pieces
Acknowledge by
Place the quantity of the pieces to be counted, the number of
pieces will be displayed
36
PRINT
, „0.0" appears
PRINT
, „0.0" appears and „PCS" flashes
PRINT
.
Display:
P4 Func
4.1.FFun
PcS
4.1.FFun
SAVE?
0.00 g
FREE
(Example)
10
(Example)
0.0 g
PcS
(Example)
PcS
(Example)
PcS
(Example)
PLJ-GM-BA-e-1614