Installation Of Living Connect; Installation - Step By Step; Preparation - Danfoss Living Connect Bedienungsanleitung

3. Installation - step by step

3.1 Preparation

living connect® is supplied with adapters for Danfoss
UK
RA valves and valves with M30X1.5 (K) connections
(014G0002), two alkaline AA batteries and a 2 mm
DE
Allen key.
DK
Inserting the batteries
Remove the battery cover and insert
NL
the two batteries.
Ensure that the batteries are correctly
inserted.
M
installation, if this is not the case, see reinstallation
mode page 10.
3.2 Installation of
1. Start by mounting the the adapter.
2. Tighten the RA adapter using the
Allen key.
Tighten the K adapter by hand
(max. 5 Nm).
3. Screw the thermostat onto the
adapter and hand-tighten (max.
5 Nm).
4. Press and hold
6
must flash on the display before
living connect
for approx. 3 seconds to fix the thermostat.
®
RA K
2mm
Key
living connect®