Adjustments For Over/Undersized Radiators; Reset To Factory Settings - Danfoss Living Connect Bedienungsanleitung

4. Technical settings

4.3 Adjustments for over/undersized radiators

The factory setting is
Use if the radiator appears oversized for the room.
P1
Use if it is undersized.*
P3
Press for at least 3 seconds until
M is displayed.
Press until
Pb
Select , or
P1 P2
and exit using
*The frequency of
varies to compensate for radiator over/under
sizing.

4.4 Reset to factory settings

Remove the battery cover and take out one battery.
Press and hold
reinserting the battery.
Danfoss Link
TM
Press OK.
Note that if the thermostat is moved to another room, it
is recommended it be reset to the factory default settings.
The thermostat will be reset and disconnected from
TM
Danfoss Link
Danfoss Heating Solutions
.
P2
is displayed. Press
using the arrow keys,
P3
P1 P2 , and
for approx. 5 seconds, while
CC will then display "device removed".
CC.
P3 regulation
UK
DE
DK
pb
NL
p2
11