Start Up; Description Of The Appliance; Before Startup - Kärcher SE 4002 Originalbetriebsanleitung

Please switch off the machine first us-
–
ing the main switch before disconnect-
ing the machine from the mains.
WARNING
Certain materials may produce explosive
vapours or mixtures when agitated by the
suction air!
Never vacuum up the following materials:
Explosive or combustible gases, liquids
–
and dust particles (reactive dust parti-
cles)
Reactive metal dust particles (such as
–
aluminium, magnesium, zinc) in combi-
nation with highly alkaline or acidic de-
tergents
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
–
thinners, acetone, heating oil).
In addition, these substances may cause
the appliance materials to corrode.
Symbols in the operating
instructions
DANGER
Immediate danger that can cause severe
injury or even death.
WARNING
Possible hazardous situation that could
lead to severe injury or even death.
CAUTION
Possible hazardous situation that could
lead to mild injury to persons or damage to
property.

Start up

Description of the Appliance

When you unpack the system, check that
everything is complete.
If there are any missing parts or you detect
any transport damage when unpacking,
please inform your dealer immediately.
Illustrations on fold-out page!
Illustration
1 Motor casing
2 Carrying handle
3 Foam filter
4 Filter lock
14
5 Power cord with plug
6 Storage, power cord
7 Switch for suction (0 / I)
8 Switch for spraying (0 / I)
9 Release fresh water reservoir
10 Fresh water tank
11 Container
12 Swivel casters
13 Connection for the suction hose of the
multi-purpose vacuum cleaner
14 Connection spray hose
15 Spray/suction hose
16 Handle
17 Surrounding air separator
18 Spray lever
19 Lock key for spray mist
20 Lock lever
21 Spray / suction tubes 2 x 0.5 m
22 Storage for suction tubes and accesso-
ries
23 Spray-ex floor nozzle for carpet clean-
ing, with hard surface attachment
24 Washer nozzle for cleaning upholstery
Accessories wet and dry vacuuming
25 Attachment for wet/dry vacuuming
26 Floor nozzle with hard surface insert
27 Crevice nozzle
28 Upholstery nozzle
29 Filter bag

Before Startup

Illustration
 Remove the fresh water reservoir.
Press the release and remove the tank.
Note:
The motor casing can only be removed
if the fresh water reservoir was re-
moved first.
Illustration
 Remove the motor casing. For this,
fold the carrying handle forward to un-
latch the reservoir. Remove the acces-
sories and swivel casters from the res-
ervoir.
Illustration
 Turn the container, press in the steering
roller in the openings at the base of the
container till the end-point.
– 7
EN