Special Accessories - Kärcher BPE 4200/50 Betriebsanleitung

The figures of the following special accessories can be found on page 4 of these instruc-
tions.
6.997-350.0 Suction assembly,
3.5 m
6.997-349.0 Suction assembly,
7.0m
6.997-348.0 Suction hose 3.5m
6.997-347.0 Suction hose, by the
meter, 3/4"(19 mm)
25 m
6.997-346.0 Suction hose, by the
meter, 1"(25.4mm)
25 m
6.997-360.0 Suction hose for
driven well and pipe-
lines
6.997-345.0 Suction filter Basic
3/4"(19 mm)
6.997-342.0 Suction filter Basic
1"(25.4 mm)
6.997-341.0 Suction filter Premi-
um
6.997-359.0 Pump connection
G1 (33.3 mm) incl.
Check valve

Special accessories

Complete, ready to connect, vacuum-tight suction
hose with suction filter and backflow preventer. Can
also be used as an extension for the suction hose.
3/4"(19 mm) hose with G1(33.3 mm) threaded con-
nection.
Complete ready to connect, vacuum tight suction
hose for direct connection to the pump. To extend
the suction assembly or for use with suction filters.
3/4"(19 mm) hose with G1(33.3 mm) threaded con-
nection.
Vacuum-tight spiral hose, to be cut into individual
lengths. Can be used as individual suction assem-
bly combined with connections and suction filters.
Vacuum-tight spiral hose to be connected on the
suction side of the pump. 1" (25.4 mm) hose with
threaded connection G1 (33.3 mm) on both ends.
Caution: The suction hose may not be used as a
pressure hose.
To be connected to the suction hose meter length.
The backflow preventer shortens the re-suction
time. (including hose clamps)
To be connected to the suction hose meter length.
The backflow preventer shortens the re-suction
time. (including hose clamps). Durable metal/plas-
tic construction. Suitable for 3/4"(19 mm) or 1"(25.4
mm) hoses.
Suitable for 3/4" (19 mm) or 1" (25.4 mm) hoses.
With G1" (33.3 mm) threaded connection. If used in
a domestic water supply system, please use a flat
seal. The included backflow valve is not suitable for
this application.
9
English 19
Deutsch