Special Accessories - Kärcher BPE 4000/45 AUTO CONTROL Bedienungsanleitung

The figures of the following special accessories can be found on page 4 of these instructions.
6.997-350.0 Suction assembly, 3.5 m Complete, ready to connect, vacuum-tight suction hose with
6.997-349.0 Suction assembly, 7.0m
6.997-348.0 Suction hose 3.5m
6.997-347.0 Suction hose, by the me-
ter, 3/4" (19 mm) 25 m
6.997-346.0 Suction hose, by the me-
ter, 1" (25.4mm) 25 m
6.997-360.0 suction hose for pipes
6.997-345.0 Suction filter Basic 3/
4"(19 mm)
6.997-342.0 Suction filter Basic
1"(25.4 mm)
6.997-341.0 Suction filter Premium
6.997-359.0 Pump connection G1
(33.3 mm) incl. Check
valve
6.997-358.0 Connection kit Basic
G1 (33.3 mm)
6.997-340.0 Connection kit Premi-
um G1(33.3 mm)
6.997-343.0 Prefilter (flow up to
3,000 l/h)
6.997-344.0 Prefilter (flow up to
6,000 l/h)
6.997-356.0 Swimmer switch
6.997-417.0 Pressure compensat-
ing hose 3/4" (19mm),
1m
3/4" (19mm), 1m
20

Special accessories

suction filter and backflow preventer. 3/4" (19 mm) hose with
G1 (33.3 mm) threaded connection.
Complete ready to connect, vacuum tight suction hose for di-
rect connection to the pump. To extend the suction assembly
or for use with suction filters. 3/4" (19 mm) hose with G1 (33.3
mm) threaded connection.
Vacuum-tight spiral hose, to be cut into individual lengths.
Can be used as individual suction assembly combined with
connections and suction filters.
Vacuum-tight hose to reduce noise with fixed installations.
1"(25.4 mm) hose with threaded connection G1(33.3 mm)
on both ends.
Caution: The suction hose may not be used as a pressure
hose.
To be connected to the suction hose meter length. The
backflow stop prevents the return flow of the transported
water and thus shortens the re-suction time.
(including hose clamp)
To be connected to the suction hose meter length. The back-
flow stop prevents the return flow of the transported water and
thus shortens the re-suction time.
Durable metal/plastic construction. Suitable for 3/4" (19
mm) and 1" (25.4 mm) hoses.
(including hose clamp)
Suitable for 3/4" (19 mm) or 1" (25.4 mm) hoses. With G1"
(33.3 mm) threaded connection. If used in a domestic water
supply system, please use a flat seal. The included back-
flow valve is not suitable for this application.
To connect 1/2" (12.7 mm) water hoses to pumps with G1
(33.3 mm) threaded connections.
To connect 3/4" (25.4mm) water hoses to pumps with G1
(33.3 mm) threaded connections. For increased water flow.
Pump prefilter to protect the pump from coarse dirt particles
or sand. The filter insert can removed for cleaning. With G1
(33.3 mm) threaded connection.
Switches the pump on and off automatically depending on
the water level. With 10 m special connection cable.
Connecting hose for the pressure compensation in the do-
mestic water supply system. To connect the pump to rigid
pipe line systems. Furthermore, the internal storage volume
in the hose prevents frequent switching on and off of the
pump.
With G1 (33.3 mm) threaded connection.
– 6
EN