Special Accessories - Kärcher BPP 3000/42 Originalbetriebsanleitung

The figures of the following special accessories can be found on page 4 of these instruc-
tions.
6.997-350.0 Suction assembly,
3.5 m
6.997-349.0 Suction assembly,
7.0m
6.997-348.0 Suction hose 3.5m
6.997-360.0 Suction hose for
driven well and pipe-
lines
6.997-347.0 Suction hose, by the
meter, 3/4" (19 mm)
25 m
6.997-346.0 Suction hose, by the
meter, 1" (25.4mm)
25 m
6.997-345.0 Suction filter Basic
3/4"(19 mm)
6.997-342.0 Suction filter Basic
1"(25.4 mm)
6.997-341.0 Suction filter Premi-
um
6.997-343.0 Prefilter (flow up to
3,000 l/h)
6.997-344.0 Prefilter (flow up to
6,000 l/h)

Special accessories

Complete, ready to connect, vacuum-tight suction
hose with suction filter and backflow preventer. Can
also be used as an extension for the suction hose.
3/4" (19 mm) hose with G1 (33.3 mm) threaded
connection.
Complete ready to connect, vacuum tight suction
hose for direct connection to the pump. To extend
the suction assembly or for use with suction filters.
3/4" (19 mm) hose with G1 (33.3 mm) threaded
connection.
Vacuum-tight spiral hose to be connected on the
suction side of the pump. 1" (25.4 mm) hose with
threaded connection G1 (33.3 mm) on both ends.
Caution: The suction hose may not be used as a
pressure hose.
Vacuum-tight spiral hose, to be cut into individual
lengths. Can be used as individual suction assem-
bly combined with connections and suction filters.
To be connected to the suction hose meter length.
The backflow preventer shortens the re-suction
time. (including hose clamps)
To be connected to the suction hose meter length.
The backflow preventer shortens the re-suction
time. (including hose clamps). Durable metal/plas-
tic construction. Suitable for 3/4" (19 mm) or 1"
(25.4 mm) hoses.
Pump prefilter to protect the pump from coarse dirt
particles or sand. The filter insert can removed for
cleaning. With G1 (33.3 mm) threaded connection.
9
English 17
Deutsch