Gima GIMACARE R-C4A Bedienungsanleitung Seite 33

applications. If your electrode pads no longer fully stick
to the skin's surface, replace them with new ones. Stick
the electrode pads back onto the protective foil after use
and store them in the storage bag to prevent them from
drying out. This retains the adhesive force for a longer
period.
8 .Do not use detergent to clean the electrode pads before
and after use to avoid damaging the adhesion of the
electrode pads.
9. The electrode pads must always be touched with clean
hands, it is recommended to replace the electrode pads if
they become dirty.
Caution:
1) Before applying the electrode, it is recommended for us-
ers to wash and degrease the skin, and then dry it.
2) Never remove the electrode from the skin while the de-
vice is still on.
3) Only use the electrode pads provided by the manufac-
turer. Usage of other companies' products could result
in injuries to the user.
6.13 Where do I attach electrode pads?
techniques are best for you.
Do not use any adhesive electrodes with a size smaller than
those the original manufacturer attached. Other- wise the
current density may be too high and cause inju- ries.
31