Gima GIMACARE R-C4A Bedienungsanleitung Seite 27

6.5 Select treatment channel
Press the [CH] button to select the treatment channel. The
LCD displays as follows:
6.6 Set program parameter
Press and hold [P] button to enter the setting mode.
1) In the program p1 and p2, Press [+]/[-] button to adjust
treatment time.
The LCD displays as follows:
2). In the program u1, press [P] button to adjust pulse rate
-> pulse width -> treatment time by setting the parame-
ter. Press [+]/[-] button to adjust corresponding data.
The LCD displays as follows:
25