Operation; Before Startup; Dry Vacuum Cleaning - Kärcher WD 3.800 M eco!ogic Originalbetriebsanleitung

Suction hose with hand pipe
 Slide the suction hose into the connec-
tion, it will lock into place.
(see description / illustration
In order to disconnect it, push down
with your thumb and pull the suction
hose out.
Suction tubes 2 x 0.5 m
 Connect both suction pipes and con-
nect them to the suction hose.
(see description / illustration
Crevice nozzle
 For edges, joints, heaters and hard to
reach locations.
Floor nozzle
(with inserts)
 Use the appropriate insert for vacuum-
ing on hard surfaces and carpets.
(see description / illustration
Hard surfaces, wet vacuuming: Use
the insert with 2 rubber lips.
Hard surfaces, dry vacuuming: Use
the insert with 2 bristles.
Carpets, wet and dry vacuuming:
Work without an insert.
12
Always work with an inserted car-
tridge filter - during wet as well as
)

dry vacuum cleaning!

 Illustration
Mount loose parts delivered with appli-
ance prior to start-up.
 Illustration
Recommendation: To vacuum fine
)
dust, use the filter bag.
 Illustration
Connect accessories.
 Illustration
Plug in the main plug.
 Illustration
Turn on the machine.
)
Work only with a dry cartridge filter!
 Recommendation: To vacuum fine
dust, use the filter bag.
(see description / illustration
The filling level of the filter bag depends
on the dirt that is sucked in.
The filter bag needs to be replaced
more frequently while sucking in fine
dust, sand, etc.
Clogged filter bags can burst - therefore
make sure to replace the filter bag in a
timely manner!
 Caution: Always use a pre-separator
while vacuuming ashes and soot (order
no. 2.863-139).
– 3
EN

Operation

Before Startup

Start up
Dry vacuum cleaning
)