Product Description And Specifications - Bosch PLS 300 Originalbetriebsanleitung

OBJ_BUCH-1219-003.book Page 14 Wednesday, January 11, 2017 1:29 PM
14 | English
 Use the saw station only for cutting the materials listed
under Intended Use. Marble or granite as well as tiles with
a rough surface structure and natural stone tiles cannot be
cut.
 Observe valid national and international standards.
Product Description and
Specifications
Intended Use
PLS 300: Together with the power tool, the sawing station is
intended for sawing straight lengthway and crossway cuts in
boards and profiles of hardwood and softwood, as well as al-
uminium and plastic.
Horizontal mitre angles from a maximum of –45° to +45° as
well as bevel angles from a maximum of 0° to 45° can be set.
The sawing station is intended for operation exclusively with
jigsaws from the Bosch PST DIY program.
 Only use the saw blades recommended by Bosch (see
page 127). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
PLS 300 Set, PTC 1: Together with the tile cutter, the sawing
station is intended for cutting ceramic and nonvitreous tiles to
a maximum thickness of 10 mm.
Horizontal mitre angles from a maximum of –45° to +45° can
be set.
Technical Data
Sawing station
Article number
Sawing
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
Vertical
Cutting tiles
– Max. cutting length for crossway cuts (90°)
– Max. cutting height
– Mitre/Bevel Angle
Horizontal
Weight according to EPTA-Procedure 01:2014
Dimension of suitable saw blades
Max. overall length
Max. toothed length
 Only use the saw blades recommended by Bosch (see
page 127). When using saw blades that are too thin, dan-
ger is given that the cut runs out of centre.
1 609 92A 1M8 | (11.1.17)
Product Features
The numbering of the product features refers to the illustra-
tion of the sawing station on the graphics pages.
PLS 300
1 Base unit
2 Scale for mitre angle
3 Locking knob for height adjustment
4 Guide rail with sawing slot
5 Side stops of the guide rail
6 Support extension
7 Additional support
8 Bridge
9 End stop for bevel cuts
10 Locking lever of the guide rail
11 Alignment mark
12 Locking knob for various mitre angles
13 Mitre angle indicator
PTC 1*
14 Tile cutter
15 Stop with scale
16 Break-off cones
* only in combination with PLS 300 Set
mm
mm
°
°
mm
mm
°
kg
mm 100
mm 76
PLS 300 PLS 300 Set
(PLS 300 + PTC 1)
3 603 M04 0.. 3 603 M04 1..
315
25
± 45
± 45
–
–
–
3.4 3.4 + 0.2
Bosch Power Tools
315
25
± 45
± 45
340
10
± 45