Create Air Dual Compact Bedienungsanleitung Seite 8

The fan is supplied with the base detached. It is essential to place the base before turning
on the fan.
Warning: Never use the fan without having properly assembled the base and other parts.
Remove the fan and all its components from the packaging before proceeding with assembly.
DESKTOP USE
• Insert the fan body into the base, fitting the
four quick-release tabs.
• Note: Pay special attention to correct
orientation during installation.
WALL MOUNTING
WARNING: Before proceeding with wall mounting, check that the drilling area is free of
electrical cables and water or gas pipes.
1. Using a ruler, pencil and level, mark the two
drilling points, maintaining a separation of
54 mm between them.
2. Drill the holes using an 8 mm drill bit.
8
E NGL I SH
ASSEMBLY INSTRUCTIONS
54mm
B
3. Insert the dowels using a hammer.
Tools needed
(not included)