DynaVox SPARK II Bedienungsanleitung Seite 31

7. POWER
Switches the device on and off. When switched off,
the device is disconnected from the mains. The LED
at the front panel lights up when the device is swit-
ched on.
8. AUDIO INPUT
Here you can connect one audio source device with
stereo audio high level output.
9. AUDIO OUTPUT
If desired, attach a recording device here, for exam-
ple. The stereo signal of this recording output is
identical to the audio signal of the audio input
source.
10. FUSE
This small plastic housing contains the device's
fuse. Note the safety instructions on this.
11. AC230V 50/60Hz: Power Supply Cable
Connect this mains cable to a suitable electricity
supply.
12. TO SPEAKER
Output clamps for connecting one pair of loudspea-
kers. The core wires of the loudspeaker cables are
connected directly to the terminals without plugs.
31