Werbung
Auto-Setup (Setup without Q Link functions)
When connecting to a television that does not have
the Q Link function (a Operating Instructions, page
49 for DMR-E85H, or page 46 for DMR-E55) with the
AUDIO/VIDEO OUT (a a page 4) or COMPONENT
VIDEO OUT terminal (a a page 6).
The DVD recorder's Auto-Setup function automatically tunes all
available TV stations and synchronizes the time when the TV
channel that is broadcasting time and date information is tuned.
DMR-E85H Remote control
To stop partway
Press [RETURN].
g If the clock setting menu appears
Set the clock manually (a Operating Instructions, page 46 for DMR-E85H, or page 44 for DMR-E55).
1
Turn on the television and select the
appropriate AV input to suit the DVD
recorder connections.
2
Press [^ DVD] to turn the DVD recorder on.
Auto-Setup
Ch
1
Auto-Setup in progress, please wait.
RETURN: to abort
RETURN
(When connecting to a television with RF socket only)
Set the new RF output channel to TV (refer to the instructions
for your TV).
Select an unused channel pre-set on your TV and tune it to
the RF output channel number shown on the unit's display.
(When the Auto-Setup screen does not appear clearly even
after performing the above operations, re-tune the channel
until the Auto-Setup screen becomes clear.)
3
When Auto-Setup has completed, the Owner ID settings
screen appears.
Press [q] and press the numbered
buttons to enter a 4-digit PIN number.
Owner ID
✽✽✽✽
PIN number
Name
House No.
Postcode
RETURN
RETURN : leave
4
Press [ENTER] twice to store the PIN
number.
The cursor moves to "Name".
5
Press [q].
6
Press [e, r] to select a letter and then
press [q].
Repeat this to enter the name.
7
Press [ENTER] to store the name.
8
Press [r] and [q], and then repeat steps
6, 7 to enter and store "House No." and
"Postcode".
9
Press [RETURN].
The Owner ID settings screen disappears.
Auto-Setup starts.
This takes about 5 minutes.
Make a note of the PIN
number (don't forget), as it
is not possible to return to
the factory preset.
RQT7612
9
9
Werbung
