Attaching/Removing An Insertion Tool - Parkside Performance Passp 20-Li C4 Bedienungsanleitung/Originalbetriebsanleitung

Attaching an insertion tool
(Fig. D)
Push the desired socket
o
tool holder .
1 ] [
For use with the socket adapter
o
Push the socket adapter
–
tool holder
[ 1 ]
Push a ⁄ " (19 mm) insertion tool
3
–
4
onto the socket adapter
For use with a bit holder and screw bit
o
(both not included in delivery):
Push the bit holder onto the tool
–
holder .
1 ] [
Insert a screw bit into the bit holder.
–
Removing an insertion tool
(Fig. D)
CAUTION! Risk of burns!
m
Insertion tools can become very hot.
u
Wear protective gloves whenever
appropriate.
Pull the insertion tool off the tool
o
holder .
1 ] [
˜ Checking the charging level
of the battery pack
Press next to the charging level
7 ] [
o
indicator on the battery pack
8 ] [
The charging level of the battery
o
pack is indicated by illumination of
[ 6 ]
the corresponding LED lights on the
charging level indicator
Indicator Colour
Red,
orange,
green
Red,
orange
Red
38 GB/IE
onto the
[ ]
:
[ ]
onto the
[ ]
.
.
[ ]
.
6 ] [
.
8 ] [
Meaning
Fully
charged
Partially
charged
Needs to
be charged
Charge the battery pack
o
only the red LED on the charging level
indicator is illuminated.
[ 8 ]
˜ Charging the battery pack
NOTICE! Risk of damage to the
m
battery pack
[ 6 ]
Do not expose the battery pack
u
to direct sunlight for long periods
and do not place it on a radiator.
Observe an ambient temperature of
max. +50 °C.
NOTE
You can find detailed instructions in
u
the user manual of the charger
If the battery pack
u
allow it to cool down before
charging.
1. Remove the battery pack
product.
2. Push the battery pack
charging slot of the charger
3. Connect the charger
outlet.
4. After charging: Disconnect the
charger from the socket-outlet.
[ ]
5. Pull the battery pack
charger .
[ ]
Control LEDs on the charger
Green Red
Lights —
up
— Lights
up
when
6 ] [
!
[ 6 ]
.
[ ]
is still warm,
6 ] [
from the
6 ] [
into the
[ 6 ]
.
[ ]
to a socket-
[ ]
out of the
[ 6 ]
Meaning
Fully charged
Stand-by mode (no
battery pack
6 ] [
inserted)
Charging