Timago STABLE-TIM Benutzerhandbuch Seite 34

Fix the headrest to the backrest by �ghtening the locking knobs, and then using
Velcro, fix the pillow stabilizing head to the headrest.
Step 7. Assembly of upholstery
Place the upholstery on the seat with Velcro directed downwards.
Step 8. Assembly of transverse stabiliza�on
Assemble the transverse stabiliza�on, which is located at the back of the backrest,
by �ghtening the fixing screw to the right hand grip.
On comple�on of the above ac�vi�es, the wheelchair is ready to use.
FOLDING
The wheelchair can be re-folded in order to be transported and stored more
easily.
• Swing away the footplates and set them in ver�cal posi�on (perpendicularly
to the ground).
• Grab the upholstery and detach from Velcro.
• Disassemble the headrest and transverse stabiliza�on.
• To fold the frame, pull the seat upwards by holding the front and the back
edge in the middle, so that the frame jumps out from the connec�ng
elements.
• If necessary, li� the an�-�pping wheels to the maximum height.
WHEEL LOCKS
• To lock the wheels, push the wheel lock lever forwards un�l the wheel is
fully blocked (separately for le� and right wheel). Please, note that the
wheel lock only serves to lock the wheels when the wheelchair is at a
complete stop.
WHEEL LOCKS ADJUSTMENT
The correct lock of the wheel lock depends on its adjustment and posi�on. The
handle of the wheel lock should be posi�oned so that the wheel lock shoe blocks
the wheel firmly and the lever does not face excessive resistance.
• In case of excessive resistance, pull the handle forwards slightly by twis�ng
off the locking screw which is located on the other side of wheel lock (from
the inside of the wheelchair). Set the wheel lock shoe in such posi�on that
the wheel lock blocks the wheel easily without resistance.
• When the wheel lock does not touch or lock the wheel sufficiently, follow
the above instruc�on by moving the handle in the opposite direc�on.
ATTENDANT BRAKES
The levers of the brakes are located under the hand grip on the right and le� side
and are connected with united brake by cable.
34