Timago STABLE-TIM Benutzerhandbuch Seite 33

2. Applica�on
The aluminium wheelchair is designed for people who have problems with
unassisted moving and for pa�ents with dysfunc�ons and reduced mobility. This
self propelled wheelchair can also be pushed by the accompanying person. The
wheelchair is suitable for indoor and outdoor use. The wheelchair is especially
recommended to people who have problems with mobility caused by:
• Paralysis
• Cerebral palsy
• Limbs injuries or amputa�ons
• Degenera�ons or deformity of limbs
• Heart and blood vessels disease, circulatory disorders
• Overweight or abnormal underweight
3. Assembly
UNFOLDING AND ASSEMBLY
Step 1. Unfolding the wheelchair
Place the wheelchair on the ground. Unfold the wheelchair using the hand grips
which are at the back of the backrest. Then, press the front and rear edge of the
seat so that all the elements fit together.
Step 2. Assembly of footrests
Assemble the right and the le� footrest in the front part of the frame by placing
them on two pins and turn them inwards un�l they are locked.
Step 3. Adjustment of footplates
Adjust the right and the le� footplate by �ghtening the screw placed at the
botom of footrests with included key. Then, adjust the inclina�on angle of the
footplate to the ground using the lever. Proper space should be le� between the
footplates and the ground as footplates set too low may cause difficul�es in
overcoming such obstruc�ons as curb. Adjust the footplates so that the angle
between trunk and thighs is 90
legs).
Step 4. Adjustment of an�-�pping wheels
In order to adjust an�-�pping wheels, which are located at the back of the
wheelchair, pull the lock, move the wheels upwards or downwards, and select
appropriate height.
Step 5. Checking the assembly of wheels
Li� the wheelchair slightly and spin the right wheel and then the le� one by
pulling the hand rims and check if the wheels spin properly.
Step 6. Assembly of headrest
(as a result the user does not need to contract
o
33