Querying The Hours Of Operation And The Number Of Centrifugation Runs - Hettich EBA 200 Bedienungsanleitung

EN
19.6

Querying the hours of operation and the number of centrifugation runs

The hours of operation are divided into internal and external hours of operation.
Internal hours of operation: Total time the device was switched on.
External hours of operation: Total time of the previous centrifugation runs.
With the rotor at a standstill, the query can proceed as follows:
The procedure can be aborted at any time by pressing the
 Press and hold the button for eight
SELECT
seconds.

 Press the key until the following is
SELECT
displayed:

 Press the key.
START
PULSE
TimeExt : External hours of operation.

 Press the key.
SELECT
TimeInt : Internal hours of operation.

 Press the key.
SELECT
Starts : Number of all centrifugation runs.

 Press the key twice to exit the "
STOP
OPEN
Cycles"
menu or press three times to exit the "
MACHINE MENU ".
64/137
STOP
OPEN
key.
>RCF< RPM
>RCF< RPM
Example:
RPM
>RCF<
Example:
>RCF< RPM
Example:
RPM
>RCF<
Time &
>RCF< RPM
t/min:s
t/min:s
t/min:s
t/min:s
t/min:s
Example:
t/min:s >RCF< RPM t/min:s