Frost Protection; Faults - Kärcher BR 60/95 RS Bp Pack Bedienungsanleitung

1 Screw
2 Cover
3 Drive chain
Loosen screws.
Remove the lid.
Check the chain drive and pinion for
wear.

Frost protection

In case of danger of frost:
Empty the fresh and dirt water reser-
voirs.
Store the appliance in a frost-protected
room.
Display Cause
0814 Fault in drive motor control
7600 Fault in brush drive
7800 Connection cable to drive motor
is defective
7801 Control is overheated
7802
9000 No brushes inserted in cleaning
head
Battery charge is low
Switch on the device when the
accelerator pedal has been acti-
vated.
22 English

Faults

Danger
Risk of injury! Before carrying out any tasks
on the machine, set the main key to "0" and
remove it. Pull out the battery plug.
In case of faults that cannot be remedied
using the table below please contact the
customer service.
Faults with display (only BD)
Remedy
Reset fuse of brush drive.
Switch off device and let it cool down.
Insert brushes
Charging battery
Release accelerator pedal, turn the key switch to "0", turn the key
switch to "1", press the safety pedal, press unlocking key, press
accelerator pedal.
By whom
Customer
Service
Operator
Customer
Service
Operator
Operator
Operator
Operator