NEC MultiSync LCD3210 Bedienerhandbuch Seite 28

Main-Menu
ADVANCED OPTION
Sub-Menu
S-VIDEO MODE
INPUT RESOLUTION
*:INPUT RGB2/3 only
BLACK LEVEL
EXPANSION
*:INPUT VIDEO, DVD/HD only
GAMMA SELECTION
SCAN MODE
*:INPUT DVD/HD, VIDEO only
SCAN CONVERSION
FILM MODE
*:INPUT DVD/HD, VIDEO only
IR CONTROL
01_English
ADVANCED OPTION
S-VIDEO MODE
S-VIDEO MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
TILE MATRIX
:SEL SET :NEXT :RETURN :EXIT MENU
EXIT MENU
ADVANCED OPTION INPUT RESOLUTION
S-VIDEO MODE
AUTO
INPUT RESOLUTION
1024 X 768
GAMMA SELECTION
1280 X 768
SCAN CONVERSION
1360 X 768
TILE MATRIX
HEAT STATAS
IR CONTROL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
S-VIDEO MODE BLACK LEVEL EXPANSION
BLACK LEVEL EXPANSION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
S-VIDEO MODE
GAMMA SELECTION
BLACK LEVEL EXPANSION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
S-VIDEO MODE SCAN MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
S-VIDEO MODE
SCAN CONVERSION
BLACK LEVEL EXPANSION
GAMMA SELECTION
SCAN MODE PROGRESSIVE
SCAN CONVERSION
FILM MODE
IR CONTROL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
ADVANCED OPTION
S-VIDEO MODE FILM MODE
BLACK LEVEL EXPANSION
GAMMA SELECTION
SCAN MODE
SCAN CONVERSION
FILM MODE
IR CONTROL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
IR CONTROL
ADVANCED OPTION
NORMAL
IR CONTROL
LOCK
TILE MATRIX
HEAT STATUS
POWER ON DELAY
DATE & TIME
SCHEDULE
ADVANCED OPTION RESET
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU :SEL
24
Selects the S-Video input port function.
PRIORITY:
If cable is connected to the S-Video input, it will have
priority the composite input port.
PRIORITY / SEPARATE
SEPARATE:
+ -:SEL EXIT :RETURN :EXIT MENU
MENU
S-Video port and Composite port are selectable as
independent input port.
Selects to decision of input signal about below timings,
1024x768, 1280x768 and 1360x768.
AUTO: Determines the resolution automatically.
1024x768: Determines the resolution as 1024x768
1280x768: Determines the resolution as 1280x768
:SEL EXIT :RETURN MENU :EXIT MENU
1360x768: Determines the resolution as 1360x768
Selects a level of black expansion.
HIGH
MIDDLE
In case of go under the black cut-off level, please adjust
OFF
the "Black level" in moderation on OSM menu.
:SEL EXIT :RETURN MENU :EXIT MENU
Selects a display gamma.
1: 2.2
2: 2.4
2. 2
2. 4
3: S gamma
S GAMMA
NATIVE
4: Native
:SEL :RETURN :EXIT MENU :EXIT MENU
EXIT MENU
NOTE: sRGB picture mode is standard and cannot be
changed.
Changes the display area of the image.
OVERSCAN / UNDERSCAN OVERSCAN: Set to display area about 95%
UNDERSCAN: Set to display area about 100%
+ -: SEL
EXIT :RETURN MENU :EXIT MENU
Selects IP (Interlace to Progressive) converter function.
PROGRESSIVE: Enable the IP function, to convert
interlace signal to progressive. Normally use this setting.
/ INTERLACE
INTERLACE: Disable the IP function.
+ -: SEL EXIT :RETURN MENU :EXIT MENU
NOTE: This mode is better suited for motional pictures,
but it is in danger of image retention.
Selects Film mode function.
AUTO: Enable the Film mode function. This mode is
better suited for movies, which is converted 24 Frames/
AUTO / OFF
sec source to DVD Video. We recommend to select
"PROGRESSIVE" in "SCAN CONVERSION".
+ -: SEL EXIT :RETURN MENU :EXIT MENU
OFF: Disable the Film mode function. This mode is
better suited for Broadcasting or VCR source.
Selects the infrared wireless remote controller mode.
The item in this menu will become effective by pressing
"SET" button on the selected item.
NORMAL: The monitor will be controlled normally by
wireless remote controller.
LOCK: Disable the monitor control by infrared wireless
SET :SET EXIT :RETURN
remote controller.
Keep pressing "DISPLAY" button during 5 sec or more,
this setting will return to "NORMAL".
English-24
06/06/2005, 11:05
MAIN MENU
PICTURE
SCREEN
AUDIO
PIP
CONFIGURATION 1
CONFIGURATION 2
ADVANCED OPTION
:SEL :NEXT :RETURN :EXIT MENU
SET EXIT MENU