NEC MultiSync LCD3210 Bedienerhandbuch Seite 27

OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR
INFORMATION
01_English
CONFIGURATION 2
LONG CABLE MANUAL
OSM TURN OFF
OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
CONFIGURATION 2
LONG CABLE MANUAL
INFORMATION OSM
OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL
:SEL SET :NEXT :RETURN :EXIT MENU
EXIT MENU
CONFIGURATION 2
LONG CABLE MANUAL OFF TIMER
OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
OSM POSITION
CONFIGURATION 2
LONG CABLE MANUAL
OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU :SEL
CONFIGURATION 2
LONG CABLE MANUAL
INPUT DETECT
OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
CONFIGURATION 2
LONG CABLE MANUAL
MONITOR INFORMATION
OSM TURN OFF
INFORMATION OSM
OFF TIMER
OSM POSITION
INPUT DETECT
MONITOR INFORMATION
:SEL SET :NEXT EXIT :RETURN MENU :EXIT MENU
23
The OSM control menu will stay on as long as it is use.
In the OSM Turn Off submenu, you can select how long
the monitor waits after the last touch of a button to shut
10 SEC.
off the OSM control menu. The preset choices are
+ -:ADJ EXIT :RETURN MENU :EXIT MENU
10 -240 seconds.
Selects the information OSM display or not. The
information OSM will display when input signal or
ON 10 SEC.
source change or warning message like as no-signal or
OFF
out-of range.
+ -:ADJ EXIT :RETURN
A time between 3 to 10 seconds is available.
To select OFF TIMER mode ON/OFF.
In the OFF TIMER menu, you can preset the monitor to
automatically power down.
ON 1 HOUR
OFF
A time between 1 to 24 hours is available.
+ -:ADJ EXIT :RETURN
When the OFF TIMER is set, the SCHEDULE
(see page 25) settings will be disabled.
H POSITION
50
Adjusts the position of the OSM menu.
V POSITION
70
+ -:ADJ :RETURN
EXIT
Selects the method of input detection when more than
two computers are connected.
FIRST DETECT: When the current video input signal is
not present, then the monitor searches for a video signal
from the other video input port. If the video signal is
present in the other port, then the monitor switches the
video source input port to the new found video source
automatically. The monitor will not look for other video
signals while the current video source is present.
This function is available at input RGB 1/2/3.
LAST DETECT: When the monitor is displaying a signal
from the current source and a new secondary source is
supplied to the monitor, the monitor will automatically
FIRST DETECT
LAST DETECT
VIDEO DETECT
switch to the new video source. When current video input
NONE
:SEL :RETURN :EXIT MENU
EXIT MENU
signal is not present, the monitor searches for a video
signal from the other video input port. If the video signal
is present in the other port, then the monitor switches the
video source input port to the new found video source
automatically.
This function is available at input RGB 1/2/3.
VIDEO DETECT: DVD/HD or VIDEO inputs will have
priority over RGB1/2/3. When DVD/HD or VIDEO input
signal is present the monitor will change and keep to the
DVD/DH or VIDEO input.
NONE: The Monitor will not search the other video input
port.
MODEL NAME:
LCD3210
Indicates the model and serial number of your monitor.
SERIAL:
12315XXX
EXIT :RETURN MENU :EXIT MENU
English-23
06/06/2005, 11:05